QSC WL2082-i

wl2082-ibk
96,800.00 THB ต่อหน่วย Manufacturer: QSCQSC

รายละเอียดย่อ :
Installation line array - dual neodymium 8" cone LF, dual titanium diaphragm, neodymium magnet compression driver HF, selectable bi-amp/tri-amp operation, 140° horizontal coverage, integral array hardware, available in black or white
 
รายละเอียดทั้งหมด :
 

QSC WL2082-i ลำโพง Installation line array - dual neodymium 8" cone LF, dual titanium diaphragm,

neodymium magnet compression driver HF, selectable bi-amp/tri-amp operation, 140° horizontal

coverage, integral array hardware, available in black or white

Features

WL2082-i line array

  • Installation-optimized design brings affordable and uncompromised line array performance to a broader range of venues
  • Compact and attractive appearance, available in black and white, harmonizes with any installation environment
  • Wide 140° horizontal coverage
  • Economical and easy-to-install suspension system with ample array adjustability
SPECIFICATIONS WL2082-i WL118-sw
Configuration 2½ way, biamp or triamp Vented box
Transducers
  High Frequency 


  Low Frequency

Dual 50 W 8Ω 1" exit, 1.75" titanium diaphragm, neodymium magnet assembly
Dual 200 W 16Ω 8" woofers, 2" voice coils, neodymium magnet assemblies, weather resistant cone 

--


850 W, 8Ω 18" woofer with a 4" voice coil, ceramic magnet assembly
Frequency Response (±3 dB) 80 Hz - 20 kHz 32 Hz - 200 Hz
Frequency Range (-10 dB) 68 Hz - 22 kHz 29 Hz - 800 Hz
Nominal Impedance HF: 16Ω
LF biamp mode: 8Ω
LF triamp mode: 16Ω (×2)

LF: 8Ω
Sensitivity  HF: 106 dB
LF: 97 dB
(4 V @ 1 m) 
98 dB
(2.83 V @ 1 m) 
Continuous Power Capacity 1 
 
 
HF: 100 W
LF biamp mode: 400 W
LF triamp mode: 200 W (×2)


LF: 850 W
Recommended Power HF: 200 W
LF biamp mode: 800 W
LF triamp mode: 400 W (×2)


LF: 1750 W
Maximum Output (dB SPL at 1 m) 
  Continuous / Peak

HF: 126 dB / 132 dB 
LF: 122 dB / 128 dB 


LF: 128.5 dB / 134.5 dB
Nominal Coverage Horizontal 140 degrees 
Vertical: dependent on number of elements used
 
Cabinet Type Ported, elliptical / trapezoidal Vented subwoofer
Enclosure Material HIPS (high impact polystyrene) with UV protectant 18 mm Baltic Birch Plywood
Finish Available in black (WL2082-i BLK) or white (WL2082-i WHT) paintable Available in black (WL118-sw BLK) or white (WL118-sw WHT) paintable
Grille Perforated, formed aluminum 16 gauge powder-coated steel with cloth backing
Connectors 2 x NL-8 in parallel 2 x NL8 in parallel / 2 x NL4 in parallel
Pin Outs
Pins Bi-amp Tri-amp
1+/1- NC NC
2+/2- NC LF2
3+/3- LF LF1
4+/4- HF HF
NL8
Pins  
1+/1- Sub
2+/2- Pass thru
3+/3- Pass thru
4+/4- Pass thru

NL4
Pins  
1+/1- Sub
2+/2- Pass thru
Attachment Points Integral, side plate adjustable rigging system, vertical splay adjustable in 1° increments from 0° - 10° Integral, non-adjustable (straight array only)
Dimensions 11.8" H x 27" W x 13.4" D
(300 mm x 686 mm x 340 mm)
22.1" H x 27.6" W x 30.3" D 
(562 mm x 702 mm x 771 mm)
Weight 37 lb (16.8 kg) net
45 lb (20.45 kg) shipping
111 lb (50.4 kg) net
121 lb (55 kg) shipping
Accessories Available FB2082-i: Fly-bar for WL2082-i, WL118-sw and WL115-sw. Available in black or white.

EB2082-i: Extension bar, allows WL118-sw or WL115-sw to be suspended behind WL2082-i. Available in black or white.

PB2082-i: Pullback bar for WL2082-i. For use when pulling back the bottom of the array is necessary to achieve the desired angle. Available in black or white.

AB2082-i: Angle bracket, allows greater vertical splay between WL2082-i and WL118-sw or WL115-sw enclosures in ground stacked configurations. Available in black. Requires two brackets per array, sold individually.

GS115-sw: Ground stack kit for WL118-sw or WL115-sw.
QRP-KIT-1: Kit of four (4) Quick Release Pins for use in lieu of included bolts.